You are using staging server - a separate instance of the ESP Component Registry that allows you to try distribution tools and processes without affecting the real registry.


uploaded 2 years ago



## Table of Contents

- [Introduction](#introduction)
- [Getting Started](#get-started)
- [Monitoring Results](#monitoring)
- [Troubleshooting](#troubleshooting)

## Introduction

<a name="introduction"></a>

The ESP FreeRTOS CoreMQTT is based on [coreMQTT]( and enables users to connect their ESP32 based devices to any MQTT broker. It provides some examples which can help understand most common use cases.

## Getting Started

<a name="get-started"></a>

### Hardware

You will basically just need a development host and an [ESP32 development board]( to get started.

### Development Host Setup

This project is to be used with Espressif's IoT Development Framework, [ESP IDF]( Follow these steps to get started:

- Setup ESP IDF development environment by following the steps [here](
- In a separate folder, clone the esp-freertos-coremqtt project as follows (please note the --recursive option, which is required to clone the various git submodules required by esp-freertos-coremqtt)

``` bash
$ git clone --recursive

> Note that if you ever change the branch or the git head of either esp-idf or esp-freertos-coremqtt, ensure that all the submodules of the git repo are in sync by executing `git submodule update --init --recursive`

## Monitoring Results

<a name="monitoring"></a>
To monitor activity on your ESP device, run:

 `$ make monitor`

## Troubleshooting
<a name="troubleshooting"></a>

1. Some common problems can be fixed by disabling the firewall.

2. You can try with the followings, if your build fails:
	- `$ git submodule update --init --recursive`
	- Check the compiler version and verify that it is the correct one for your ESP IDF version.
	- Check if the IDF_PATH is set correctly
	- Clean the project with `make clean` and if required, using `rm -rf build sdkconfig sdkconfig.old`


Supports all targets

License unspecified

To add this component to your project, run: add-dependency "kumekay/esp-freertos-coremqtt^2.3.1"

or download archive


  • Downloaded in total
    Downloaded in total 8 times
  • Downloaded this version
    This version: 4 times


kumekay/esp-freertos-coremqtt version: 2.3.1