You are using staging server - a separate instance of the ESP Component Registry that allows you to try distribution tools and processes without affecting the real registry.
<!-- Copyright 2026 Morse Micro SPDX-License-Identifier: Apache-2.0 --> # dual_if Runs two interfaces at once: the ESP's native Wi-Fi as a SoftAP hosting a small HTTP server, and the Wi-Fi HaLow interface as a station. After the Wi-Fi HaLow link is up it periodically sends UDP packets to a hard-coded peer (`192.168.12.1:12345`). This example uses a custom partition format as the coexistence of two Wi-Fi stacks is too large for the defaults. --- ## Running 1. Set the target for your ESP board, e.g. `idf.py set-target esp32c6`. 2. Set the Wi-Fi HaLow country code (required). Run `idf.py menuconfig` and set `Wi-Fi HaLow Connection Manager → Country code to use for Wi-Fi HaLow` (`CONFIG_HALOW_COUNTRY_CODE`) to your two-letter region code. 3. Build, flash and monitor, layering the board profile for your board/hat if required. See [configs](../../configs/README.md) for the full `SDKCONFIG_DEFAULTS` usage. ## Configuration Options under `HaLow dual_if Example Configuration` (`idf.py menuconfig`): | Option | Type | Default | Description | | --- | --- | --- | --- | | `CONFIG_HALOW_SSID` | string | `"MorseMicro"` | SSID of the Wi-Fi HaLow AP to join. | | `CONFIG_HALOW_PSK` | string | `"12345678"` | Passphrase for the Wi-Fi HaLow AP. |
To create a project from this example, run:
idf.py create-project-from-example "rankshank/moistmicro-halow=2.10.4-esp32-2:dual_if"