You are using staging server - a separate instance of the ESP Component Registry that allows you to try distribution tools and processes without affecting the real registry.
# ESP FreeRTOS CoreMQTT ## Table of Contents - [Introduction](#introduction) - [Getting Started](#get-started) - [Monitoring Results](#monitoring) - [Troubleshooting](#troubleshooting) ## Introduction <a name="introduction"></a> The ESP FreeRTOS CoreMQTT is based on [coreMQTT](https://github.com/FreeRTOS/coreMQTT) and enables users to connect their ESP32 based devices to any MQTT broker. It provides some examples which can help understand most common use cases. ## Getting Started <a name="get-started"></a> ### Hardware You will basically just need a development host and an [ESP32 development board](https://www.espressif.com/en/products/hardware/development-boards) to get started. ### Development Host Setup This project is to be used with Espressif's IoT Development Framework, [ESP IDF](https://github.com/espressif/esp-idf). Follow these steps to get started: - Setup ESP IDF development environment by following the steps [here](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html). - In a separate folder, clone the esp-freertos-coremqtt project as follows (please note the --recursive option, which is required to clone the various git submodules required by esp-freertos-coremqtt) ``` bash $ git clone --recursive https://github.com/espressif/esp-freertos-coremqtt.git ``` > Note that if you ever change the branch or the git head of either esp-idf or esp-freertos-coremqtt, ensure that all the submodules of the git repo are in sync by executing `git submodule update --init --recursive` ## Monitoring Results <a name="monitoring"></a> To monitor activity on your ESP device, run: `$ make monitor` ## Troubleshooting <a name="troubleshooting"></a> 1. Some common problems can be fixed by disabling the firewall. 2. You can try with the followings, if your build fails: - `$ git submodule update --init --recursive` - Check the compiler version and verify that it is the correct one for your ESP IDF version. - Check if the IDF_PATH is set correctly - Clean the project with `make clean` and if required, using `rm -rf build sdkconfig sdkconfig.old`
idf.py add-dependency "espressif/esp-freertos-coremqtt^0.0.3"